Complete interface missing

Monde en
1

Hi!,

I’ve installed Spip 2.0.9 and I don’t have the option: « simplified interface / interface complete » in the private area.
The main problem is that I can’t use the keywords. The documentation says that I must use the complete interface in order to apply them.

Any idea/suggestions?

Thanks in advance and apologize for any inconvenience.

Regards,

2

you could go to
yoursite.com/ecrire/?exec=configuration and activate keywords .

( "simplified interface / interface complete" doesn't exist anymore in 2.0.9 )

On Sun, Sep 6, 2009 at 11:39 PM, Noelia Yavel<dax125@gmail.com> wrote:

Hi!,

I've installed Spip 2.0.9 and I don't have the option: "simplified interface
/ interface complete" in the private area.
The main problem is that I can't use the keywords. The documentation says
that I must use the complete interface in order to apply them.

Any idea/suggestions?

Thanks in advance and apologize for any inconvenience.

Regards,

_______________________________________________
spip-en@rezo.net - http://listes.rezo.net/mailman/listinfo/spip-en

3

Hi Noelia

Since last versions there is no more different interface modes but you can go to the config area (as admin) to turn on/off many aspects of SPIP, keywords included.

regards
martin

On Sun, Sep 6, 2009 at 6:39 PM, Noelia Yavel <dax125@gmail.com> wrote:

Hi!,

I’ve installed Spip 2.0.9 and I don’t have the option: « simplified interface / interface complete » in the private area.
The main problem is that I can’t use the keywords. The documentation says that I must use the complete interface in order to apply them.

Any idea/suggestions?

Thanks in advance and apologize for any inconvenience.

Regards,

spip-en@rezo.net - http://listes.rezo.net/mailman/listinfo/spip-en

–
nqnwebs.com
textosypretextos.com.ar

4

Thanks for your responses.

I activated the keywords in the configuration section (and I also activated the advanced configuration of keyword group).
After that, I created some keywords but when I’m trying to apply them to some article I can’t do it… there’s not any tab o subsection where I can select the keyword for my article.
I need to activate some other option?

Regards,
Noelia

On Sun, Sep 6, 2009 at 7:11 PM, Martín Gaitán <gaitan@gmail.com> wrote:

Hi Noelia

Since last versions there is no more different interface modes but you can go to the config area (as admin) to turn on/off many aspects of SPIP, keywords included.

regards
martin

On Sun, Sep 6, 2009 at 6:39 PM, Noelia Yavel <dax125@gmail.com> wrote:

Hi!,

I’ve installed Spip 2.0.9 and I don’t have the option: « simplified interface / interface complete » in the private area.
The main problem is that I can’t use the keywords. The documentation says that I must use the complete interface in order to apply them.

Any idea/suggestions?

Thanks in advance and apologize for any inconvenience.

Regards,

spip-en@rezo.net - http://listes.rezo.net/mailman/listinfo/spip-en

–
nqnwebs.com
textosypretextos.com.ar

5

Noelia Yavel a écrit :

I activated the keywords in the configuration section (and I also activated
the advanced configuration of keyword group).
After that, I created some keywords but when I'm trying to apply them to
some article I can't do it... there's not any tab o subsection where I can
select the keyword for my article.

in ?exec=articles&id_article=xx
clic on the arrow on the left of "KEYWORDS"
as : http://www.circaete.net/vrac2/keywords.jpg

6

I don’t have the option KEYWORDS as I suppose to have. Is for that reason that I think that I have to enable something more, but I don’t know what or how.

Regards,
Noelia

On Sun, Sep 6, 2009 at 8:06 PM, denisb <denisb@laposte.net> wrote:

Noelia Yavel a écrit :

I activated the keywords in the configuration section (and I also activated
the advanced configuration of keyword group).
After that, I created some keywords but when I’m trying to apply them to
some article I can’t do it… there’s not any tab o subsection where I can
select the keyword for my article.

in ?exec=articles&id_article=xx
clic on the arrow on the left of « KEYWORDS »
as : http://www.circaete.net/vrac2/keywords.jpg

spip-en@rezo.net - http://listes.rezo.net/mailman/listinfo/spip-en

7

Are you writing a NEW article? or are you trying to modify an article written by another author with an editor user?

On Sun, Sep 6, 2009 at 9:06 PM, Noelia Yavel <dax125@gmail.com> wrote:

I don’t have the option KEYWORDS as I suppose to have. Is for that reason that I think that I have to enable something more, but I don’t know what or how.

Regards,
Noelia

On Sun, Sep 6, 2009 at 8:06 PM, denisb <denisb@laposte.net> wrote:

Noelia Yavel a écrit :

I activated the keywords in the configuration section (and I also activated
the advanced configuration of keyword group).
After that, I created some keywords but when I’m trying to apply them to
some article I can’t do it… there’s not any tab o subsection where I can
select the keyword for my article.

in ?exec=articles&id_article=xx
clic on the arrow on the left of « KEYWORDS »
as : http://www.circaete.net/vrac2/keywords.jpg

spip-en@rezo.net - http://listes.rezo.net/mailman/listinfo/spip-en

spip-en@rezo.net - http://listes.rezo.net/mailman/listinfo/spip-en

–
Marina
www.artenqn.com.ar

8

Noelia Yavel a écrit :

I don't have the option *KEYWORDS* as I suppose to have. Is for that reason
that I think that I have to enable something more, but I don't know what or
how.

hum.

on ?exec=mots_type&new=oui
(or ?exec=mots_type&id_groupe=xx if modify)
did you check the boxes ?

http://www.circaete.net/vrac2/keyword2.jpg ?

9

I tried with a new article and also modify an article, both of them with and administrator user.

I may think I know where the problem is (something with the DB) … I’m going to do some tests.

Thanks!

On Sun, Sep 6, 2009 at 9:30 PM, Marina Moran <esperandoelmilagro@gmail.com> wrote:

Are you writing a NEW article? or are you trying to modify an article written by another author with an editor user?

On Sun, Sep 6, 2009 at 9:06 PM, Noelia Yavel <dax125@gmail.com> wrote:

I don’t have the option KEYWORDS as I suppose to have. Is for that reason that I think that I have to enable something more, but I don’t know what or how.

Regards,
Noelia

On Sun, Sep 6, 2009 at 8:06 PM, denisb <denisb@laposte.net> wrote:

Noelia Yavel a écrit :

I activated the keywords in the configuration section (and I also activated
the advanced configuration of keyword group).
After that, I created some keywords but when I’m trying to apply them to
some article I can’t do it… there’s not any tab o subsection where I can
select the keyword for my article.

in ?exec=articles&id_article=xx
clic on the arrow on the left of « KEYWORDS »
as : http://www.circaete.net/vrac2/keywords.jpg

spip-en@rezo.net - http://listes.rezo.net/mailman/listinfo/spip-en

spip-en@rezo.net - http://listes.rezo.net/mailman/listinfo/spip-en

–
Marina
www.artenqn.com.ar

10

Finally, I solved my problem.

I upgraded from version 1.9 to 2.0.9 and I followed this instructions: http://www.spip.net/en_article2154.html , but for some reason the DB didn’t upgrade 100% correctly. I performed the procedure again and I have the Keywords options.

Thank you all for your help!

Regards,
Noelia

On Sun, Sep 6, 2009 at 9:47 PM, denisb <denisb@laposte.net> wrote:

Noelia Yavel a écrit :

I don’t have the option KEYWORDS as I suppose to have. Is for that reason

that I think that I have to enable something more, but I don’t know what or
how.

hum.

on ?exec=mots_type&new=oui
(or ?exec=mots_type&id_groupe=xx if modify)
did you check the boxes ?

http://www.circaete.net/vrac2/keyword2.jpg ?

spip-en@rezo.net - http://listes.rezo.net/mailman/listinfo/spip-en